FelixConferenceTable


FelixConferenceTable is a console for collaborative team work.

  • It offers the potential of a laid back coffee table experience or a raised, high energy standing room only condition.
  • The FelixConferenceTable™ is available with a factory installed 3rd party A-V teleconferencing technology.

Patents pending



Circular Pier (for three (3) seated positions), Dual Zone and Height Adjustable.

Circular Pier (for three (3) seated positions), Dual Zone and Height Adjustable.


Lateral Pier (for five 5 positions), Dual Zone and Height Adjustable.

Lateral Pier (for 5 seated positions), Dual Zone and Height Adjustable.

Extended Pier (for 7 seated positions), Dual Zone and Height Adjustable.

Extended Pier (for 7 seated positions), Dual Zone and Height Adjustable.


FelixConferenceTable
click to expand
  • Circular Pier with three (3) seated positions (60” wide by 60” deep) and Height Adjustable (or static).
  • Lateral Pier with five (5) seated positions (96” wide by 60” deep) and Height Adjustable (or static).
  • Extended Pier with 7 seated positions (60” wide by 12’-6” deep) and Height Adjustable (or static).
  • Constructed as one or two self supporting modules that are each substantially pre-assembled in the factory.
  • The FelixConferenceTable™ is a Dual Zone configuration with one (1) motorized monitor rack and one (1) extended, monolithic motorized work deck (the table top).
  • The monitor rack can accommodate min/max combinations of large and small monitors, cameras and speakers etc (up to 3 tiers of 6 only side by side 30” monitors or two (2) tiers of 60” flat panels).
  • The motorized monitor rack has 500+lbs of lifting capacity.
  • The motorized conference table tops for 3 and 5 seated positions are cantilevered with 1,000+lbs of lifting capacity.
  • The motorized conference table top for 7 seated positions includes a second base bench structure providing 1,500+lbs of lifting capacity.
  • Each zone is connected with a cable chain.
  • The Linak® lift system has a minimal standby power requirement of 0.1 watts.
  • Both the monitor rack and the extended work deck have electrically activated vertical travel from 22” to 45” (Profile A) suitable for wheel chairs and sit-to-stand.
  • The Circular Pier and the Lateral Pier are both supported on a single base bench structure.
  • The Extended Pier is supported on a combination of primary and secondary base bench structures.
  • The primary base bench structure functions as the lower equipment enclosure, suitable for towers, mini towers and small form factor CPUs (inside clear dimensions are 14.75” high and 26.25” deep).
  • Universal-rack-mount chassis are available in horizontal and vertical configurations.
  • The base bench structure has a modular base deck with a large floor interface area.
  • The lower equipment enclosure is ventilated for heat dissipation by natural convection. No electric fans required. The multi zone Series 7.0 design allows heated air to rise through the top of the lower equipment cabinet and pass unobstructed up and around the modular monitor rack.
  • Available with factory installed electric power and data cabling and associated devices (as specified).
  • Available with factory installed 3rd party A-V conferencing hardware (as specified).
  • Suitable for American and British standard electrical fittings.
  • Accessories include fixtures to support speakers and cameras and work deck technology insets (in variable sizes).
  • All models are available as Static (rather than height adjustable).
  • All models are made to order and open to cad/cam modifications.
  • Finishes: See standards or specify an alternate material and/or color.
  • See Support for assistance with project development.