- NovaLink™ - S7podium™

S7podium is offered in Dual and Triple Zone configurations that enable desk top equipment to be recessed for sight lines… to-see-hear-and-be-seen by co-workers and supervisors™.

(Patents pending)




S7podium Triple Zone

Linear Cluster - Height Adjustable (22” to 47”).

Shown finishes are Bright Silver metal and Shibui Woodprint Laminate. Model reference number: SP03-01200-0120





S7podium Dual Zone

Linear Cluster - Height Adjustable (22” to 47”). Special feature: Extended returns.

Shown finishes are Carbon Fiber metal, Chalk White laminate and Galloway Burl wood-pattern laminate. Model reference number: SP01-00260-0026





S7podium Dual Zone

Linear - Height Adjustable (22” to 47”).

Shown finishes are Bright Silver metal and White laminate. Model reference number: SP01-00280-0028





S7podium Dual Zone

Linear - Height Adjustable (22” to 47”).

Shown finishes are Bright Silver metal and White Laminate. Model reference number: SP01-00740-0074





S7podium Dual Zone

Linear - Height Adjustable (22” to 47”). Special feature: monitor rack with overhead displays.

Shown finishes are Bright Silver metal and White laminate. Model reference number: SP01-00840-0084





S7podium Triple Zone

Linear Cluster - Height Adjustable (22” to 47”).

Shown finishes are Chalk White metal, White Laminate and Topaz Khayawood laminate. Model reference number: SP03-01330-0133





S7podium Triple Zone

Models with and without work decks for multiple touch screens and independent monitors. Linear - Height Adjustable (22” to 47”).

Shown finishes are Chalk White metal and laminate. Model reference number: SP04-01530-0153





S7podium Triple Zone (Without Workdeck)

Linear - Height Adjustable (22” to 47”).

Shown finishes are Chalk White metal and laminate. Model reference number: SP04-01530-0153




Product Details S7podium™

click to expand
  • Dual zone with one (1) motorized monitor rack and one (1) motorized work deck.
  • Dual zone ‘without’ a work deck has two (2) motorized monitor racks.
  • Triple zone with two (2) motorized monitor racks and one (1) motorized work deck.
  • Triple zone ‘without’ a work deck has three (3) motorized monitor racks.
  • Each zone is independent and height adjustable.
  • The work deck is monolithic and can be machined for alternate shapes and special features.
  • The electric lift system requires just 0.1 watts of power in the standby mode.
  • Vertical travel is from 22” up to 47” (sit-to-stand).
  • Each zone can be adjusted independently for communication (sight lines) and comfort.
  • Both triple and dual zone models allow for dynamic eye and hand elevations (per individual stature) and for sit to stand posture changes.
  • Multi pivot support arms enable touch screens and display monitors to be adjusted in a concave arc centered on the user (without tools).
  • Multi pivot supports arms also enable I.T. technician access.
  • Multi zone desk tops facilitate depth of field eye exercise.
  • Robust base bench structure enables anti collision sensors to function reliably.
  • A safety gap all around the motorized work deck.
  • Extended foot space (is available) under the CPUs.
  • Each unit is free standing (85% assembled in the factory and efficient for installations and future reconfigurations).
  • Suitable for a rack mount equipment chassis and/or CPUs (horizontal and small form factor) on full extension slide out trays.
  • Large floor interface area and a lateral cable trough under the CPUs.
  • Ventilated for heat dissipation by natural convection…no electric fans required as heated air can pass up and around the modular monitor racks.
  • (To enhance ‘best’ model selection) The components of the prospective technology kit should be specified (preferably by quantity, brand and model number).
  • Available from the factory with electric power distribution, data cabling and associated devices (as specified).
  • Suitable for American and British standard electrical fittings.
  • Available with ‘to the ceiling’ cable columns.
  • Available with secondary component ‘accessories’ for every requirement (pre-engineered or developed for the Client)
  • Available with connecting modules (in all angles) for contiguous layouts.
  • Available with extended returns and counters .
  • All models are made to order and open to cad/cam modifications.
  • All models are available as static or height adjustable.
  • See Finishes for S7 pallet (open to customer specified alternates).
  • Contact support@novalink.com for assistance with project development.
Click here to access S7models&cadblocks™